As the core equipment for household water supply, the correct use of a Household water pump directly affects water use efficiency and the lifespan of the device. The following are operational guidelines across three key dimensions:
1. Start and Stop Operation Guidelines of Household water pump
Before starting, ensure that the inlet pipe is fully submerged in water to avoid dry running that can damage the mechanical seal. During winter use, check whether the pump body is frozen and wait for the ice to naturally melt before powering on. Continuous operation should not exceed 2 hours at a time, as overheating can accelerate the aging of the insulation.
2. Daily Maintenance Points of Household water pump
Clean the inlet screen monthly to prevent algae or sand from blocking the flow path. During long periods of inactivity, drain the accumulated water inside the pump and lubricate the motor bearings. Special attention: if the Household water pump exhibits abnormal vibration or noise, immediately cut off the power and investigate. Common causes include a loose impeller or worn bearings.
3. Environmental Adaptation Management of Household water pump
Avoid exposing the equipment to rain or direct sunlight, as plastic parts can become brittle under UV radiation. In hard water areas, it is recommended to circulate a citric acid solution every quarter to prevent scale buildup that affects head performance. Ensure the base is level during installation, as an inclination exceeding 5° can accelerate seal wear.
By following the above key points, a Household water pump can maintain over 85% of its original operating efficiency for 5-8 years. Developing the habit of regularly touching the Household water pump body to check its temperature and observing the water pressure can help detect most potential faults in advance.
More information about Household water pump:https://sinogens.com/
